Why QYR ? 
USA
Beijing
India
MembershipGlobal Automotive Water Pump Development Overview 2019
Published Date: 2019-01-30 | Pages: 103 | Tables: 112 | Report Id: 955685 | Hits: 238 | Machinery & Equipment
Automotive water pump is pump used on the automobile engine to transport water to cool the engine. This report involved two type of automotive water pump which is being used.
In the last several years, Global market of Automotive Water Pump developed steady, with an average growth rate of 2.67%.
The global average price of Automotive Water Pump is in the decreasing trend, from 26.5 USD/ Units in 2011 to 25.3 USD/Unit in 2015. With the situation of global economy, prices will be in decreasing trend in the following five years.
The classification of Automotive Water Pump includes Mechanical Water Pump, Electric Water Pump. The proportion of Mechanical Water Pump in 2015 is about 86.30%, and the proportion of Electric Water Pump in 2015 is about 13.7%.
Automotive Water Pump is application in Passenger Car and Commercial Vehicle. The most proportion of Automotive Water Pump is Passenger Car, and the market share in 2015 is about 80.27%.
China region is the largest supplier of Automotive Water Pump, with a production market share nearly 27.43% in 2015. Europe is the second largest supplier of Automotive Water Pump, enjoying production market share about 23.20% in 2015.
China is the largest consumption place, with a consumption market share nearly 27.12% % in 2015. Following China, Europe is the second largest consumption place with the consumption market share of 23.41%.
The global Automotive Water Pump market is valued at 2810 million US$ in 2018 is expected to reach 3370 million US$ by the end of 2025, growing at a CAGR of 2.3% during 2019-2025.
This report focuses on Automotive Water Pump volume and value at global level, regional level and company level. From a global perspective, this report represents overall Automotive Water Pump market size by analyzing historical data and future prospect. Regionally, this report focuses on several key regions: North America, Europe, China and Japan.
At company level, this report focuses on the production capacity, ex-factory price, revenue and market share for each manufacturer covered in this report.
The following manufacturers are covered:
KSPG AG
Bosch
Aisin Seiki
Xibeng
Continental
Gates Corporation
GMB Corporation
ACDelco
Jung Woo Auto
Edelbrock
Fawer
Jinglong
US Motor Works
Dongfeng
Longji Group
FMI
Segment by Regions
North America
Europe
China
Japan
Segment by Type
Mechanical Water Pump
Electric Water Pump
Segment by Application
Passenger Car
Commercial Vehicle
Research Approach
This research study involved the extensive usage of both primary and secondary data sources. The research process involved the study of various factors affecting the industry, including the government policy, market environment, competitive landscape, historical data, present trends in the market, technological innovation, upcoming technologies and the technical progress in related industry, and market risks, opportunities, market barriers and challenges. The following illustrative figure shows the market research methodology applied in this report.
Market Size Estimation
Top-down and bottom-up approaches are used to estimate and validate the global market size for company, regional division, product type and application (end users).
The market estimations in this report are based on the selling price (excluding any discounts provided by the manufacturer, distributor, wholesaler or traders). Market share analysis, assigned to each of the segments and regions are achieved through product utilization rate and average selling price.
Major manufacturers & their revenues, percentage splits, market shares, growth rates and breakdowns of the product markets are determined through secondary sources and verified through the primary sources.
All possible factors that influence the markets included in this research study have been accounted for, viewed in extensive detail, verified through primary research, and analyzed to get the final quantitative and qualitative data. The market size for top-level markets and sub-segments is normalized, and the effect of inflation, economic downturns, and regulatory & policy changes or others factors are accounted for in the market forecast. This data is combined and added with detailed inputs and analysis from QYResearch and presented in this report.
The following figure shows an illustrative representation of the overall market size estimation process used for this study.
Market Breakdown and Data Triangulation
After complete market engineering with calculations for market statistics; market size estimations; market forecasting; market breakdown; and data triangulation. Extensive primary research was conducted to gather information and verify and validate the critical numbers arrived at. In the complete market engineering process, both top-down and bottom-up approaches were extensively used, along with several data triangulation methods, to perform market estimation and market forecasting for the overall market segments and sub-segments listed in this report.
Secondary Sources
Secondary Sources occupies approximately 25% of data sources, such as press releases, annual reports, Non-Profit organizations, industry associations, governmental agencies and customs data, and so on. This research study includes secondary sources; directories; databases such as Bloomberg Business, Wind Info, Hoovers, Factiva (Dow Jones & Company), TRADING ECONOMICS, and avention; Investing News Network; statista; Federal Reserve Economic Data; annual reports; investor presentations; and SEC filings of companies.
Primary Sources
In the primary research process, various sources from both the supply and demand sides were interviewed to obtain qualitative and quantitative information for this report. The primary sources from the supply side include product manufacturers (and their competitors), opinion leaders, industry experts, research institutions, distributors, dealer and traders, as well as the raw materials suppliers and producers, etc.
The primary sources from the demand side include industry experts such as business leaders, marketing and sales directors, technology and innovation directors, supply chain executive, end users (product buyers), and related key executives from various key companies and organizations operating in the global market.
Global Active Seat Belt System Industry Research Report, Growth Trends and Competitive Analysis 2021-2027
Published Date: 2021-03-05 | Pages: 111 | Tables: 145
USD 5,600 （Single License） USD 11,200 （Enterprise License）
Global Automatic Sewing Machine Industry Research Report, Growth Trends and Competitive Analysis 2021-2027
Published Date: 2021-03-05 | Pages: 140 | Tables: 163
USD 5,600 （Single License） USD 11,200 （Enterprise License）
Global Aviation Scissors Industry Research Report, Growth Trends and Competitive Analysis 2021-2027
Published Date: 2021-03-05 | Pages: 115 | Tables: 147
USD 5,600 （Single License） USD 11,200 （Enterprise License）
Global Cable Cutting Shears Industry Research Report, Growth Trends and Competitive Analysis 2021-2027
Published Date: 2021-03-05 | Pages: 116 | Tables: 145
USD 5,600 （Single License） USD 11,200 （Enterprise License）
Global Car Care Tools Industry Research Report, Growth Trends and Competitive Analysis 2021-2027
Published Date: 2021-03-05 | Pages: 114 | Tables: 143
USD 5,600 （Single License） USD 11,200 （Enterprise License）
Licenses Type
Why QYR
Fastest report delivery service
More than 10 years of vast experience
Operational for 24 * 7 & 365 days
In-depth and comprehensive analysis
Excellent after sales support
Owns large database
Need Help ?
Global Automotive Water Pump Development Overview
©2007-2026 QY Research All Rights Reserved.
