Why QYR ? 
USA
Beijing
India
Membership
JPA face mask is a loose-fitting, disposable device that creates a physical barrier between the mouth and nose of the wearer and potential contaminants in the immediate environment. Facemasks are not to be shared and may be labeled as surgical, isolation, dental or medical procedure masks. They may come with or without a face shield. Facemasks are made in different thicknesses and with different ability to protect you from contact with liquids. These properties may also affect how easily you can breathe through the facemask and how well the facemask protects you.
The global product types of Face Mask include disposable masks and reusable masks. Among them, disposable masks have the largest output value, accounting for about 84% of the total market share in 2019.
The main global manufacturers of Face Masks are 3M, Honeywell, SPRO Medical, Kowa, makrite, Owens & Minor, UVEX, Kimberly Clark, McKesson, Prestige AMERITECH, CM, mollycke health, moldex metric, Ansell, unicharm, Cardinal Health, Te Yin, Japan Vilene, Shanghai Dasheng, etc.
The global Face Mask market size is projected to reach US$ 30430 million by 2026, from US$ 15830 million in 2020, at a CAGR of 11.5% during 2021-2026.
In terms of production side, this report researches the Face Mask production capacity, value, ex-factory price, growth rate, market share by manufacturers, regions (or countries) and by Type.
In terms of consumption side, this report focuses on the consumption of Face Mask by regions (countries) and by Application.
The global Face Mask market is thoroughly, accurately, and comprehensively assessed in the report with a large focus on market dynamics, market competition, regional growth, segmental analysis, and key growth strategies. Buyers of the report will have access to verified market figures, including global market size in terms of revenue and volume. As part of production analysis, the authors of the report have provided reliable estimations and calculations for global revenue and volume by Type segment of the global Face Mask market. These figures have been provided in terms of both revenue and volume for the period 2015-2026. Additionally, the report provides accurate figures for production by region in terms of revenue as well as volume for the same period. The report also includes production capacity statistics for the same period.
Regions and Countries
Regional analysis is another highly comprehensive part of the research and analysis study of the global Face Mask market presented in the report. This section sheds light on the sales growth of different regional and country-level Face Mask markets. It includes sales (consumption) analysis and forecast by each application segment and type segment in terms of volume for the period 2015-2020. For the period 2015-2026, it provides detailed and accurate country-wise volume sales analysis and region-wise volume analysis of the global Face Mask market.
The report offers in-depth assessment of the growth and other aspects of the Face Mask market in important countries, including U.S., Canada, Germany, France, U.K., Italy, Russia, China, Japan, South Korea, India, Australia, Taiwan, Indonesia, Thailand, Malaysia, Philippines, Vietnam, Mexico, Brazil, Turkey, Saudi Arabia, UAE, etc. Key regions covered in the report are North America, Europe, Japan, China, Southeast Asia, India and Australia
Leading Players
The analysts authoring the report have closely analyzed each leading and prominent player of the global Face Mask market. The competitive analysis section of the report provides a list of players competing at a global level and segregates them according to the type segment of the global Face Mask market they focus on. It also provides production analysis by the manufacturer for the period 2015-2020. In addition, readers of the report are provided with revenue analysis and price analysis by the manufacturer at a global level for the period 2015-2020. Considering the same period, the market entry year of each player included in the report has been provided.
This report includes the following manufacturers; we can also add the other companies as you want.
3M
Honeywell
SPRO Medical
KOWA
Makrite
Owens & Minor
Uvex
Kimberly-clark
McKesson
Prestige Ameritech
CM
Molnlycke Health
Moldex-Metric
Ansell
Unicharm
Cardinal Health
Te Yin
16771Japan Vilene
Shanghai Dasheng
Hakugen
Essity (BSN Medical)
Zhende
Winner
Jiangyin Chang-hung
Tamagawa Eizai
Gerson
Suzhou Sanical
Sinotextiles
Alpha Pro Tech
Irema
DACH
Yuanqin
Troge Medical
Market Segment by Type
Disposable Masks
Reusable Masks
Market Segment by Application
Individual
Hospital and Clinic
Industrial
Research Approach
This research study involved the extensive usage of both primary and secondary data sources. The research process involved the study of various factors affecting the industry, including the government policy, market environment, competitive landscape, historical data, present trends in the market, technological innovation, upcoming technologies and the technical progress in related industry, and market risks, opportunities, market barriers and challenges. The following illustrative figure shows the market research methodology applied in this report.
Market Size Estimation
Top-down and bottom-up approaches are used to estimate and validate the global market size for company, regional division, product type and application (end users).
The market estimations in this report are based on the selling price (excluding any discounts provided by the manufacturer, distributor, wholesaler or traders). Market share analysis, assigned to each of the segments and regions are achieved through product utilization rate and average selling price.
Major manufacturers & their revenues, percentage splits, market shares, growth rates and breakdowns of the product markets are determined through secondary sources and verified through the primary sources.
All possible factors that influence the markets included in this research study have been accounted for, viewed in extensive detail, verified through primary research, and analyzed to get the final quantitative and qualitative data. The market size for top-level markets and sub-segments is normalized, and the effect of inflation, economic downturns, and regulatory & policy changes or others factors are accounted for in the market forecast. This data is combined and added with detailed inputs and analysis from QYResearch and presented in this report.
The following figure shows an illustrative representation of the overall market size estimation process used for this study.
Market Breakdown and Data Triangulation
After complete market engineering with calculations for market statistics; market size estimations; market forecasting; market breakdown; and data triangulation. Extensive primary research was conducted to gather information and verify and validate the critical numbers arrived at. In the complete market engineering process, both top-down and bottom-up approaches were extensively used, along with several data triangulation methods, to perform market estimation and market forecasting for the overall market segments and sub-segments listed in this report.
Secondary Sources
Secondary Sources occupies approximately 25% of data sources, such as press releases, annual reports, Non-Profit organizations, industry associations, governmental agencies and customs data, and so on. This research study includes secondary sources; directories; databases such as Bloomberg Business, Wind Info, Hoovers, Factiva (Dow Jones & Company), TRADING ECONOMICS, and avention; Investing News Network; statista; Federal Reserve Economic Data; annual reports; investor presentations; and SEC filings of companies.
Primary Sources
In the primary research process, various sources from both the supply and demand sides were interviewed to obtain qualitative and quantitative information for this report. The primary sources from the supply side include product manufacturers (and their competitors), opinion leaders, industry experts, research institutions, distributors, dealer and traders, as well as the raw materials suppliers and producers, etc.
The primary sources from the demand side include industry experts such as business leaders, marketing and sales directors, technology and innovation directors, supply chain executive, end users (product buyers), and related key executives from various key companies and organizations operating in the global market.
Global and United States Gutta Percha Obturator Market Insights, Forecast to 2027
Published Date: 2021-07-27 | Pages: 141 | Tables: 162
USD 3,900 （Single License） USD 7,800 （Enterprise License）
Global Gutta Percha Obturator Market Size, Manufacturers, Supply Chain, Sales Channel and Clients, 2021-2027
Published Date: 2021-07-27 | Pages: 120 | Tables: 154
USD 5,900 （Single License） USD 11,800 （Enterprise License）
Global Enzyme-linked Immunosorbent Assay (ELISA）Analyzers Market Size, Manufacturers, Supply Chain, Sales Channel and Clients, 2021-2027
Published Date: 2021-07-27 | Pages: 142 | Tables: 176
USD 5,900 （Single License） USD 11,800 （Enterprise License）
Global Plastic Airless Pumps Market Report, History and Forecast 2016-2027, Breakdown Data by Manufacturers, Key Regions, Types and Application
Published Date: 2021-07-27 | Pages: 121 | Tables: 146
USD 3,350 （Single License） USD 6,700 （Enterprise License）
Global Pharmaceutical Ampoules Market Report, History and Forecast 2016-2027, Breakdown Data by Manufacturers, Key Regions, Types and Application
Published Date: 2021-07-27 | Pages: 125 | Tables: 144
USD 3,350 （Single License） USD 6,700 （Enterprise License）
Licenses Type
Need Help ?
Global Face Mask Industry
©2007-2026 QY Research All Rights Reserved.
